Navcom SF-2040G Pole Mount GIS Sensor
NavCom's SF-2040G integrated StarFire™ receiver provides instant position
information and decimeter accuracy anywhere in the world, anytime. With
StarFire, you no longer need a base station to achieve decimeter accuracy.
Onboard memory and a geodetic quality antenna enable millimeter level accuracy
from post-processing.
Applications
The highly integrated SF-2040G solution is designed for productivity with
minimal setup time. Two removable rechargeable batteries provide more than 10
hours performance to get you through a full day of surveying without the need to
carry spare batteries. Simply connect your controller solution to the serial
port, and receive position data in NMEA format or for additional monitor and
control capability, use a NavCom Partner controller solution. The housing is
rugged and waterproof, designed to survive a 2m-pole drop, and temporary
complete immersion in water.
The primary operating mode uses the StarFire service providing decimeter
level accuracy for immediate results in the field; great for navigation and
relocation of existing assets. The two onboard WAAS/EGNOS channels provide free
GPS corrections, which coupled with dual frequency measurements and NavCom's
enhanced SBAS algorithm typically provide half-meter real-time accuracy.
Benefits
The SF-2040G receiver uses our NCT-2100D GPS Engine, the fourth generation of
the Touchstone™ ASIC family, of which more than 25,000 are in use worldwide. The
SF-2040G incorporates our patented interference suppression and multi-path
mitigation, up to 50Hz raw data rate, and geodetic quality positioning up to
25Hz.
The antenna utilizes a tri-band design with an integral ground plane to track
GPS, SBAS and StarFire satellites all through one element. This new antenna
design provides excellent phase center stability.
Coupled with the StarFire subscription service, the SF-2040G delivers 10 cm
position fixes without the use of a second receiver serving as a base station.
Add the RTK Option and an external radio, and the SF-2040G is capable of
performing centimeter accurate RTK surveys.
Flexible Interface
The SF-2040G is easily configured by the included Windows®-based utility
program. For system integrators needing maximum flexibility, the receiver offers
the NCT binary user interface that allows complete command and control of the
GPS and L-Band Module, thus enabling customization of the interface and receiver
operation.
Features
- Fully integrated receiver in robust housing
- "All-in-view" tracking on 26 channels (12 L1/L2 GPS + 2 SBAS)
- Global decimeter level accuracy using StarFire™ corrections
- Fully automatic acquisition of StarFire™ broadcast corrections
- 2 dedicated WAAS/EGNOS channels
- L1 & L2 full wavelength carrier phase tracking
- C/A, P1 & P2 code tracking
- Two "hot-swapable", rechargeable, lightweight battery packs
- 64MB internal memory for data recording
- User programmable measurement and navigation data rates
- Minimal data latency
- Superior interference suppression
- Patented multipath rejection
- Output format NMEA 0183 or NavCom binary format
- TruBlu™- Wireless Connectivity, Bluetooth® compatible
|
